PhotonClean Premium Laser cleaning Machines:
'The' future' of industrial cleaning - The future of industrial surface preparation
The Benefits of Cleaning Without Consumables
Get Rid of Consumables & Go Green
With the advance of laser technology in surface cleaning, manufacturers are becoming aware of the extent to which laser cleaning can help them. From the automotive and aerospace industries to more general industrial applications, many uses of this revolutionary cleaning technique are still unknown.
PhotonClean, an environmentally friendly cleaning solution using innovative technology!
Non Abrasive, Non Chemical removal of Rust, Weld Preparation, Graffiti removal, Paint removal, Wood/Stone Restoration to name a few! Used in Automotive, Agricultural, Aerospace, Marine and Building Restoration negating the need for Sandblasting/Dry Ice and Chemicals with no effect on natural substrates
As a green technology, laser cleaning replaces methods that remove rust with consumables or chemicals.
It’s the only solution that meets environmental protection regulations.
Plus, pulsed fiber lasers have a very low power consumption.
Best performed using a pulsed laser, laser cleaning can replace traditional cleaning methods
Laser cleaning does generate only a small amount of dust in the air.
It can be vacuumed instantly with a dust extraction system, which we provide and preconfigure for you if needed.
Laser cleaning in detail
The success of laser cleaning can be attributed to the numerous advantages of the process.
Laser beam cleaning is a method that, for quite some time now, is no longer solely implemented for mold cleaning, but that can also be implemented to clean a wide range of different components during processing. The success of laser cleaning as an alternative to conventional cleaning methods can be attributed to the numerous advantages of the process. For one, the method only incurs very low operating costs, since no cleaning agents are used and no waste disposal is required. Secondly, the process is very precise and gentle on surfaces. Finally, the excellent cleaning results that can be achieved with the laser beam are ultimately the decisive factor. The laser evaporates oxides, dirt particles of all kinds and above all impurities from polymer-based lubricants, which are particularly difficult to remove, in a matter of seconds. The remaining surface is perfectly prepared for subsequent machining, e.g. laser welding.
The new generation of laser cleaners: cleans with Precision, Not with Brute Force
The future of industrial surface preparation !
Non-destructive Laser Cleaning Machines
Our high Energy laser non-destructive cleaning machine adopts a new generation laser and an upgraded control system and trajectory algorithm independently developed by Lasermach® and a high-end galvanometer.
The unique design makes the laser cleaning effect remain uniform under hand-held conditions. Contaminants are effectively removed and the metal substrate appears white and bright. Even if the same position is cleaned multiple times, there is still no damage and the metal color is as new. Especially suitable for silicone rubber product mold cleaning and stainless steel weld cleaning. It can be used for non-destructive cleaning and removal of various metal substrates, such as stainless steel, mold steel, aluminum alloy, titanium alloy and other surfaces.
Laser cleaning removes rust, paint, soot, oxides, oil and much more with controlled laser energy. No abrasives. No chemicals. Only LIGHT!
There are two laser cleaning technologies that cover these tasks:
Continuous wave (CW) laser cleaning uses a steady, high-power laser beam to remove rust, paint, and heavy contamination quickly and consistently. Because the energy is delivered continuously, CW systems excel on larger steel surfaces and thicker coatings where throughput matters. CW causes more damage to the carrier surface and brings the carbon up, so it becomes useless for direct painting or precision welding
Pulsed laser cleaning uses short, controlled bursts of laser energy to remove surface contamination with a high degree of precision. This makes it well-suited to detailed work, selective coating removal, and applications on more sensitive surfaces. Pulsed systems have lower average heat input and more detailed control.
Laser Surface Cleaning Safe, Fast Rust & Coating Removal
Restore any surface with no chemicals or waste
What is laser surface cleaning?
Laser surface cleaning is a game changing technology that removes rust and coatings
form nearly any type of surface.
These highly specialized lasers are 8 times faster, 100 times cleaner
and less expensive than traditional cleaning methods.
Laser Cleaning Beyond limits:
Rust, paints, coatings, dust, oxides removed in a flash!
𝗟𝗮𝘀𝗲𝗿 𝗰𝗹𝗲𝗮𝗻𝗶𝗻𝗴 𝘀𝘁𝗮𝗿𝘁𝘀 𝘄𝗶𝘁𝗵 𝗮 𝗰𝗹𝗲𝗮𝗿 𝗴𝗼𝗮𝗹. But reaching it takes more than just power.
From delicate coatings to stubborn oxide layers - consistent results depend on how precisely the lasersource works, how the machine is setup, and how the chosen parameters match the material, the contamination, and the correct selected process requirements.
That’s where the right equipment and team come in: Lasermach.
Our Laser Cleaning Solutions
PRECISE, AFFORDABLE, COST-EFFECTIVE, and CLEAN
Remember with laser cleaning there is: • NO masking, • NO chemicals used, • NO abrasive consumables, • NO blast cabinets • NO grinding wheels, • NO noise, • NO dry ice blasting and the best of all… • NO mess to clean up afterwards.
Photonclean Laser cleaning machines are transforming asset maintenance through advanced laser technology, providing unrivalled precision and outstanding surface preparation results.
Safe and Sustainable Surface Preparation for Asset Maintenance
Enhanced Safety
Laser cleaning is a safer solution— It's dustless, chemical-free, and non-contact. It eliminates the risks associated with abrasive blasting, prioritising the safety of people, assets and the environment.
Precision
Laser Cleaning removes contaminants with pinpoint accuracy across both depth and area, ensuring the underlying and surrounding material remains
Non-Abrasive
Protect delicate surfaces with a non-abrasive process that removes contaminants without excessive heat, abrasion, scratching, or material damage.
Sustainable
Offering chemical-free, water-free, and low-mess cleaning, lasers are designed to use less operational energy compared to many traditional approaches.
Reduce Downtime
Reduce operational downtime, minimise delays, and associated costs with rapid deployment, a non-invasive process that enables simultaneous operations (SIMOPS).
No Limited Access
Portable, battery operated mobile equipment designed for confined and hard-to-reach areas, easily enters small spaces with limited access to clean and prepare surfaces without the need for excessive dismantling of assets.
Premium Laser Cleaning Machines
Excellent Laser cleaning solutions
Lasermach develops and produces the world's most advanced industrial laser cleaning equipment for manual and automated use. Our laser cleaning systems range from 120 to 2500 watts of extremely precise laser light that effortlessly removes rust, dust, oxides, oil, and other contaminations from metal, plastic, ceramics, glass, stone, or concrete. And as this cleaning technique leaves the surface beneath untouched, our laser systems offer unexpected possibilities for a constantly growing number of industrial applications, ranging from dirt removal to surface structuring to surface preparation for welding or joining or non-destructive testing.
Compared to CW laser cleaning, super high frequency pulsed laser cleaning achieves much better visual results at close cleaning speeds with little or no damage to the substrate, allowing it to be used for surface cleaning of wood and stone in addition to metals. It is particularly suitable for cleaning tasks where the surface must be left intact after cleaning, such as rust and oil removal from precision molds, dirt and paint removal from wood and stone surfaces.
Excellent eco-friendly cleaning method, both for the environment and employees.
Pulse laser cleaning does not require the use of chemicals or cleaning fluids, so there is no chemical cleaning of environmental pollution problems, and it is also less likely to lead to the operator being exposed to chemical detergents. Cleaning down the waste is mainly solid powder particles, which will be splashed on the ground floor, easy to handle and recycle, and will not be inhaled by personnel, leading to respiratory diseases.
Clean as you like, the most flexible use of cleaning methods.
We offer pulse laser cleaning machines in standard configurations for flexible manual cleaning, while pulse laser cleaners can be combined with fixtures, conveyors, or robots to facilitate fully automated cleaning tasks over long distances. In addition, if our standard configuration does not meet your needs, contact us with your specifications, and we will be happy to provide a detailed customization to fully meet your goals.
PhotonClean
Experience the Advanced Laser Restoration Difference
Non-destructive Laser Cleaning Machines
Our high Energy laser non-destructive cleaning machine adopts a new generation laser and an upgraded control system and trajectory algorithm, independently developed by Lasermach® and a high-end galvanometer.
The unique design makes the laser cleaning effect remain uniform under hand-held conditions. Contaminants are effectively removed and the metal substrate appears white and bright. Even if the same position is cleaned multiple times, there is still no damage and the metal color is as new. Especially suitable for wood restauration and silicone rubber product mold cleaning and stainless steel weld cleaning. It can be used for non-destructive cleaning and removal the dirt or top layer of various metal substrates, such as stainless steel, mold steel, aluminum alloy, titanium alloy and other surfaces.
Pulsed Fiber Laser Cleaning Machine
Our pulsed fiber laser cleaning machine offers superior thermal input control compared to continuous wave (CW) models, effectively preventing overheating or micro-melting of the substrate. This precise control minimizes damage to the workpiece surface, making it an ideal choice for precision cleaning applications such as mold maintenance and artifact restoration.
Unlike CW laser cleaning machines, pulsed laser cleaning machines can remove oxides from highly reflective metal surfaces such as copper and silver, which are commonly used in conductive materials and components.
In addition to metal surfaces, our pulsed laser cleaning systems can effectively remove contaminants and coatings from non-metallic substrates such as wood, stone, concrete, and glass without causing damage.
We offer a comprehensive product range, from compact handheld portable devices to fully customized automated systems. Whether you require a flexible mobile laser cleaning system or an integrated workstation for production lines, we have solutions tailored to your specific cleaning needs.
Compare the PhotonClean Laser Cleaners
Clean with nothing more than the touch of light!
Pro 120M (Backpack)
The Backpack is a portable and ergonomic laser cleaning solution, specifically designed for on-site operations and hard-to-reach areas. Its backpack format provides maximum mobility, allowing operators to work freely while maintaining the precision and efficiency of laser cleaning technology.
Get more info
Trident Pro 220/320- Pro 220/320M
It is ideal for applications such as surface preparation before coating, tool restoration, corrosion removal, and mechanical part cleaning, all without chemicals, abrasives, or secondary waste. Rust removing, paint removing, ….
Trident High power 540
Soon available
It is ideal for applications such as surface preparation before coating, tool restoration, corrosion removal, and mechanical part cleaning, all without chemicals, abrasives, or secondary waste. Rust removing, paint removing, ….
ADVANTAGES OF LASER SURFACE TREATMENT
Laser cleaning brings benefits that give this method an advantage over other "traditional" methods of cleaning and preparing various surfaces
NON-INTRUSIVE
no mechanical and chemical impact on the cleaned surface
VERSATILE
Optimal for removing rust, cleaning composites, ceramics, wood, stone and much more
ECOLOGICAL
eliminates the use or generation of harmful substances
SELECTIVE
selective removal of individual layers from a given surface
TRIDENT TECHNOLOGY
Laser Cleaning and Laser Ablation Systems for cleaning, engraving and marking
Air-Cooled Pulse Laser Cleaner of Metals and Non-Metals
Portable and Compact: Easily portable, this machine's light and compact design fits any setting smoothly.
User-Friendly: Simple controls make it easy for anyone to operate.
Environmentally Friendly: Works without harmful chemicals, supporting a healthier environment.
Triple trident functionality
Laser Cleaning, Laser Engraving, Laser Marking
Laser engraving and marking provide a high-precision, permanent, and non-contact solution for identifying, personalizing, or decorating parts and products. This technology uses a focused laser beam to modify the surface of a material without physical contact or consumables, ensuring clean and consistent results.
Elevate production quality with Trident laser cleaning technology: Remove Paint, oil, dirt, dust, rust, and imperfections efficiently, reducing costs and improving precision, and mark & engrave with the same machine in one setup
Trident Functions: Cleaning, Marking, Engraving
Laser Cleaning
Laser Marking
Laser engraving
laser rust removal rental - laser cleaning for anilox rolls - laser cleaner rental - laser roll cleaning for printing - laser cleaning machine rental - laser cleaning for medical equipment - Laser Surface Cleaning, Degreasing, Stone Cleaning, Mold Cleaning, Restoration, Anilox Laser Cleaning Systems, Removing Oxide Layers, Paint & Varnish Removal, Inline Cleaning for Bakeries, Laser Marking Systems, and Industrial Cleaning, cleaning before and after welding.- Plastic and rubber mould cleaning. Paint stripping Lead and zinc decontamination on infrastructure.- Rust repair for NDT on vessels, windmills and offshore installations.-Automatic glass mould cleaning.- Nuclear and Asbestos decontamination. - Conservation & Restoration